Seal-it® 477 PU-FIXFOAM

• Developed specifically for adhering and installing acoustic and insulation panel materials.
• Suitable for adhering and installing various types of finishing and other plates and panels.
• Perfect for sealing joints between insulation materials and window and door frames.

• Ready-mixed and fast-curing adhesive and installation system.
• For indoor and outdoor use.
• Adheres, installs, fills (foams up slightly) and seals.
• Generates strong adhesion on numerous surfaces, including masonry and plasterwork, concrete, plasterboard, rockwool, wood, metal, EPS, EPS-P, XPS, PUR and PIR.
• Fire class B2 according to DIN 4102-1.
• Very low emission: certified according to VOC emission class A+.
• User-friendly, fast, easy, dust-free and zero-energy application that requires no cleaning.
• High thermal and acoustic insulation value.
• Efficient, very low/economical adhesive use when used with the Seal-it® PUR gun.
• Excellent resistance to hot and cold conditions, water and numerous chemicals.
• Long-lasting resistance to weather, moisture, water and ageing; does not rot.

• Application temperature (ambient and surface) between -5°C and +30°C.
• On compatible, stable, clean, uncontaminated and grease-free surfaces.
• If necessary, lightly pre-moisten the surface with water, for example, by using a plant sprayer.
• Use a suitable brush to remove any loose particles from the surface.
• Degrease the surface properly using Seal-it® 510 CLEANER.
• Give the canister approx. 20 good shakes before use.
• Cut off fully cured excess Seal-it® 477 PU-FIXFOAM with a knife and/or trowel.
• Before use, grease the threading of the gun adapter with Vaseline, PTFE and/or silicone spray to prevent the canister from sticking to the PUR gun.
• After attaching the canister to the gun, the spray speed and output volume can be adjusted using the setscrew on the back of the gun in order to ensure efficient/economic use.
• After use, tighten the setscrew on the PUR gun to prevent activation of the gun.
• Always leave the canister in the PUR gun until completely empty.
• Remove the empty canister by holding in the trigger while unscrewing it in order to expel any remaining propellant gas.
• Attach a full canister to the PUR gun directly and/or clean the PUR gun thoroughly using Seal-it® 450 PUR CLEANER.
• If the PUR gun is not working or not working properly, put Seal-it® 450 PUR CLEANER on the gun, spray through several times and let it set well for approx. 15 min. Spray through again and then remove the Seal-it® 450 PUR CLEANER canister.

SI-XXX-XXXX-XXX = Article number.
Other colours and/or packaging on request.

• VOC emission class A+