SEAL-IT® 318 FACADE-PLUS

• Specifically for sealing expansion and other movement joints.
  
  
• Joint sealing in façades/façades, floors, galleries, balconies, landings, terraces, stairwells, warehouse spaces, parking garages, platforms, tunnels, road and bridge sections.
  
  
• Permanently elastic sealing of façade elements, such as between/along frames, facades, windows, panels, panel materials, prefab elements and more.
  
  
• Natural stone sealing, such as on marble, granite, slate, bluestone and other porous (absorbent) stone types, such as (aerate) concrete, sand-lime brick, masonry, brick and other porous building materials, such as untreated woods.
  
  
• Top and bead seal made of laminated and insulating glass, according to NEN 3576/ NPR 3577.
  
  
• Concrete, wood, plastic and metal parts have a long-lasting and highly elastic seal with each other.
  
  
• Repair of damaged MS-Polymer® joints, in building and façade constructions.

• Durable permanent elastic, maximum movement capacity 25%.
  
  
• Excellent adhesion, without primer on practically all and even damp surfaces.
  
  
• User-friendly and versatile for use in building and glazing constructions.
  
  
• Can be painted over with water-based paint systems.
  
  
• Meets the requirements for burglar-resistant glass, in accordance with the Police Quality Mark for Safe Living.
  
  
• Isocyanate, solvent, silicone-free.
  
  
• Good colourfast, UV, weather, water, moisture and ageing resistance.
  
  
• Non-corrosive to metals.
  
  
• Does not stain and/or bleed on porous stones and/or other materials.
  
  
• Odourless, adhesive, blister and shrink free curing, CE certified Hybrid System

• Processing temperature (ambient and substrate) between min. +5°C and max. +40°C.
  
  
• On clean, clean, dry, load bearing, compatible, dust- and grease-free surfaces.
  
  
• Ensuring the right joint dimensions to be able to absorb movements properly.
  
  
• Remove loose components from the surface using a suitable brush.
  
  
• Degrease surfaces thoroughly using Seal-it® 510 CLEANER.
  
  
• Seal-it® 318 FACADE PLUS has a broad adhesion spectrum, but highly porous surfaces should be pre-treated with Seal-it® 520 PRIMER and non-porous surfaces with minimal adhesion should be pre-treated with Seal-it® 525 Clean & Bond.
  
  
• Smooth and tight finish, using Seal-it® 550 FINISH, for skin formation.

SI-XXX-XXXX-XXX = Article number.
Other colours and/or packaging on request.

• EN 15651-1: F-EXT-INT-CC-25HM
• VOC-emission class A+.